Made from naturally refined linseed oil, Fusion™ Linseed Soap safely cleans and conditions all of your artist, paint and wax brushes. Use for all types of brush hair, from natural to synthetic. Perfectly for cleaning hands and work surfaces as well.
For a greener studio and well-cared for tools.
100% natural, non-toxic and virtually odourless!
Directions: lather hands or working tools with soap and rinse with water. Use Brush Scrubber for extra effectiveness.
Ultra Grip™ allows Fusion Mineral Paint to adhere to surfaces that are typically not for painting such as a lacquered surface, laminate, metal or glass.
This water based emulsion increases adhesion of the paint to glossy, hard-to grip-surfaces.
Milky when wet, dries translucent with very good clarity. Always test your products prior to applying in order to ensure desired finish. Clean up with water.
This is the exact same product as Miss Mustard Seed's Bonding Agent with different branding. You can use them interchangeably.
Ideal for larger painting projects as they go far and have a self-levelling finish minimising brush strokes. Be certain to use a good synthetic paint brush, like a Cling On.
Now Available in 250ml & 37ml pots
Bronze — Our Bronze Studio Metallic is deep and rich, bringing a lavish, regal feel to your décor
Brushed Steel — Brushed Steel is perfect for creating a rustic faux-metal look or adding the perfect silver highlight
Champagne — Champagne exudes old Hollywood glamour. It is accented with the slightest hint of pink resulting in a slight shimmer of rose gold
Copper — Our best seller, Copper is a striking on-trend deep burnt sienna colour. Use with dry-brushed accents or change your knobs from brass to copper with this paint!
Pale Gold — Perfect on its own or as an accent on to accessorise décor; use Antiquing Glaze over it to create a stunning vintage gold finish
Pearl — The beautiful iridescent sheen of Pearl adds the slightest shimmering accent to just about anything
NEW LIMITED EDITION COLOURS
• Champagne Gold
• Rose Gold
***Retired: Pale Gold. Limited quantities until sold out. Copper and Bronze will only be available in tester sizes once 250ml are sold out.
You may also need:
Fusion Clear Glaze allows you to create your own custom finish.
Simply mix in a few drops of the desired colour or metallic to create a custom glaze.
Brush glaze onto surface and use a lint free cloth to wipe into crevices.
Allow to dry completely — typically 24-48 hours.
For high traffic areas, use Tough Coat Sealer. Comes in 250ml jar.
Fusion Antiquing Glaze is lightly tinted to a rich brown for the perfect antiquing look and soft matte finish.
Easy to apply with a long open time, this Antiquing Glaze creates a professional finish that everyone can achieve.
Apply sparingly with a quality brush, wipe back to achieve desired effect. Allow the glaze to dry 12-24 hours. Always glaze a sample first to ensure desired results prior to application. Use sparingly over light colours, so as not to over-age your piece
For high traffic areas, Tough Coat is recommended to seal.
Using a wax resist allows to easy distressing. For exact placement of distressed lines and edges press the wax along the edges where you would like to see the distressed antiquing effect between layers of paint. Anything that is applied on top of the waxed areas will easily distress without too much sanding!
You will notice this resist once you are giving your piece a light sanding at the end of your application of all layers of paint. The paint underneath the wax will remain in place, and any paint applied on top of the wax will come off effortlessly, allowing for the perfect distressed look.
This is a pure, 100% natural beeswax block.
Small 75g, $24
Makes about 2.4 litres of Chalky Flat Finish or 700ml of the sea swept or crackled look.
Large Fresco 400g, $76
Makes about 3.8 litres of the sea swept or crackled look and about 11.8L of the chalky flat finish